Single hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateES Windows Window Replacement: The Tampa Owner’s Guide
ES Windows replacement in Tampa typically runs $650 to $1,400 per opening installed, and we keep the most common ES Windows sash balances, tilt latches, and weather seals on our trucks so most jobs finish the same day. ES Windows are known for their aluminum frames and impact-rated glass packages, which hold up well in Florida humidity, but the moving hardware takes a beating from daily use and salt air. Most owners discover the problem the hard way: a window that suddenly won’t stay open, a crank that spins without moving the sash, or a frame that whistles during afternoon thunderstorms off the bay.
What you’re dealing with is not a full window tear-out in most cases. It’s a specific component that failed, and matching it correctly to your ES Windows model matters more than buying a “universal” part that fits poorly and fails again in a year.
Which ES Windows Models This Applies To
ES Windows builds several product lines, and the replacement part you need depends on which one is in your home. The most common lines we see in Tampa are the ES 7000 series (standard aluminum frame, single-hung and horizontal roller) and the ES 9000 series (heavier impact-rated aluminum for coastal exposure). Both use the same basic hardware family, but the sash balances and roller assemblies are spec’d differently based on sash weight.
Every ES Windows unit has a small foil label on the top or side of the frame, usually with the series number and a manufacturing date code. If that label is gone or faded past reading, we match the part by measuring the sash channel width and the sash weight itself. The gotcha with ES Windows specifically: the balance springs are calibrated to within a few pounds on the 7000 series, so a “close enough” replacement from a big-box store will make the sash either slam shut or refuse to stay up. Our recommendation is always an OEM ES Windows part first, and if that’s discontinued, a quality aftermarket equivalent sized to the exact sash weight. Lightwell Windows Tampa is an independent service provider, not affiliated with ES Windows, and we stock both OEM and aftermarket parts so you’re not waiting on a factory lead time.
Styles & brands we work with
Signs Your ES Windows Window Replacement Is Failing
- The sash drops or slams when released. This is the classic failed balance spring on a single-hung or double-hung unit. The spring inside the balance cartridge has snapped or lost tension, which means the sash now weighs its full amount with nothing to counter it.
- You have to lift with two hands and prop the window open. Worn or broken tilt latches no longer hold the sash in the frame channel, so the window drifts even when the balance is still intact.
- The window whistles or lets a draft through at night. Weatherstripping on ES Windows aluminum frames compresses flat after years of Tampa heat cycles, especially on west-facing walls. The frame is fine; the seal is not.
- The crank handle turns but the window does not move. On casement and awning units, the gear teeth inside the operator have stripped. This is common on ES Windows casements exposed to salt air near Bayshore or Davis Islands.
- Condensation fogs between the glass panes. The seal on the insulated glass unit has failed. In Tampa humidity, this happens faster than in drier climates because of the constant vapor pressure against the seal.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Most Tampa ES Windows replacement jobs land between $650 and $1,400 per opening, fully installed. Where your job falls in that range comes down to what actually failed. A tilt latch or weatherstrip swap is at the lower end, a sash balance assembly with labor sits mid-range, and a full insulated glass unit replacement with a new sash runs higher. We write every price down before any work starts, and that written number is the number you pay. No change orders, no end-of-day surprise.
Every replacement includes the part itself, the labor to remove and reinstall the sash, a check of the surrounding frame for rot or water intrusion, and a clean-up pass before our crew leaves. Shoe covers and drop cloths go down on every visit, and we take a photo of the cleaned-up area before we pull out of the driveway. The work itself is covered by our 365-Day Done Right Promise: if the finished repair is not right, Lightwell makes it right.
DIY or Call Us?
What you can safely do on your own: read the model label on the frame, take a photo of the failed part, and note whether the window is a single-hung, slider, or casement. That information helps us bring the right part on the first visit. What we’d caution against: pulling a sash out of a vertical track without knowing how to release the balance tension. A loaded balance spring on an ES Windows 9000 series carries enough energy to bruise fingers badly if it lets go. The same goes for removing impact glass on your own; those units are heavy and awkward without a second set of hands.
If it’s a tilt latch or a weatherstrip, a careful homeowner can usually handle it with the right part and a screwdriver. If it’s a balance, a gear operator, or glass, call us at (850) 360-6785. We’ll talk you through what you’re seeing, and if the job needs a visit, we’ll come with the part on the truck.
FAQs
Balance springs and weatherseals on ES Windows units in Tampa typically last 8 to 12 years before showing real wear, though west-facing windows near the water can degrade hardware faster due to heat and salt exposure. The glass itself often lasts the life of the window unless the seal fails and fog develops. Call (850) 360-6785 if you’re noticing drafts or a sash that fights you, and we’ll tell you over the phone whether it sounds like a simple fix.
In many cases, yes, the individual part can be replaced without touching the frame or the other window components. The exception is a failed insulated glass seal, which usually means replacing the glass unit itself rather than repairing the pane. Call (850) 360-6785 and describe the symptom; we’ll tell you plainly whether you’re looking at a part swap or a glass replacement before we ever schedule a visit.
A single sash balance, tilt latch, or weatherstrip replacement on an ES Windows unit typically takes 30 to 60 minutes once we’re on site. A full glass unit replacement may take one to two hours, depending on the size and whether the sash needs re-glazing. We’ll give you a clear time window when we schedule the visit so you’re not blocking out a whole day.
We keep the most common ES Windows balances, latches, weatherseals, and rollers stocked locally so most Tampa jobs are done same-day or next-day. Oddball sizes or discontinued series may need a factory order, which we’ll tell you about upfront with a firm timeline and no guessing. Call (850) 360-6785 and we’ll check stock against your model while you’re on the line.
A light well is what brings daylight deep into a building; that is what a well-installed window should do for your home. Keith Yamada is the kind of installer who reads a frame before touching it, checking for rot, settling, and water intrusion that a less patient crew would miss. Keith grew up in Los Angeles and learned the trade at Los Angeles Trade-Technical College before spending decades on installations across Southern California and eventually bringing that same careful approach to Tampa. He has been the one neighbors in South Tampa call when they want the job done without a second visit. For ES Windows replacement parts matched correctly the first time, backed by a written price and a 365-Day Done Right Promise, call Lightwell Windows Tampa at (850) 360-6785 for a free estimate. Light belongs inside the room. Let us figure out what’s keeping it out.
Written by Keith Yamada, Owner, Lightwell Windows Tampa at Lightwell Windows Tampa, serving Tampa and nearby areas.
Six Reasons Homeowners Choose Lightwell Windows Tampa
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.